One can see many definitions of "axis" if checking the dictionary. I think, in Tango, the following definition makes most sense: Axis is a line around which an object rotates.
I think, if we follow this definition, saying "have axis" or "on axis" would be meaningless, because as long as the dance motion involves rotation, the axis exists. However, during the dance the axis, this invisible line is not at a fixed location (relative to the partners).
For example, when executing a molinete with the leader balancing on a single foot and pivoting while the follower moves around the leader, this axis goes though the point under the leader's working foot. Often, the molinete is not a simple rotating around the leader, it also involves translation,that is to say, the couple "drifted" away. Then this axis is moved away from the leader's single foot to somewhere between the two persons, but closer to the leader.
A different example would be when the follower is pivoting during an ocho. At the moment of pivoting, the axis is through the follower's working foot.
The shifting of axis is obvious during a volcada execution, particularly if the volcada is immediately after pivoting around the follower. To begin, the leader "erect" the follower up after her weight has been completely transferred to one foot - the working foot for pivoting. The leader moves around the follower while the follower pivots. At this time, the axis is through a point under the follower's working foot. To start the volcada, the leader moves away from the follower, thus pulling the axis away from the follower towards a point between the partners.
I think a good dancer can subconsciously sense where the axis is during the dance and knows how to keep this axis perpendicular to the floor (thus to stay balanced). Both partners can contribute to this effect.
- my two cents.
I think, if we follow this definition, saying "have axis" or "on axis" would be meaningless, because as long as the dance motion involves rotation, the axis exists. However, during the dance the axis, this invisible line is not at a fixed location (relative to the partners).
For example, when executing a molinete with the leader balancing on a single foot and pivoting while the follower moves around the leader, this axis goes though the point under the leader's working foot. Often, the molinete is not a simple rotating around the leader, it also involves translation,that is to say, the couple "drifted" away. Then this axis is moved away from the leader's single foot to somewhere between the two persons, but closer to the leader.
A different example would be when the follower is pivoting during an ocho. At the moment of pivoting, the axis is through the follower's working foot.
The shifting of axis is obvious during a volcada execution, particularly if the volcada is immediately after pivoting around the follower. To begin, the leader "erect" the follower up after her weight has been completely transferred to one foot - the working foot for pivoting. The leader moves around the follower while the follower pivots. At this time, the axis is through a point under the follower's working foot. To start the volcada, the leader moves away from the follower, thus pulling the axis away from the follower towards a point between the partners.
I think a good dancer can subconsciously sense where the axis is during the dance and knows how to keep this axis perpendicular to the floor (thus to stay balanced). Both partners can contribute to this effect.
- my two cents.
View